Table of Contents
Advertisement
ConnectLife
ConnectLife is a smart home platform that connects people, devices and services. The ConnectLife
app provides advanced digital services and carefree solutions that allow users to monitor and control
appliances, receive notifications from a smartphone, and update software (supported features may
vary depending on your appliance and the region/country where you are located).
To connect your smart device, you need a home Wi-Fi network (only 2.4 GHz networks are supported)
and a smartphone equipped with the ConnectLife app.
1. Install the ConnectLife app and create an account.
2. In the ConnectLife app, go to the »Add devices« menu and select the appropriate device type.
Then scan the QR code (it can be found on the appliance's serial number plate; you can also
enter the AUID/SN number manually).
3. The app will then guide you through the entire process of connecting the appliance to your
smartphone.
4. Once connected, the appliance can be operated remotely via the mobile app.
WiFi
On/Off
Connect to a network and pair
Connect the dishwasher to your wireless network and pair with your smartphone/tablet. (This can
also be done from the dishwasher's Settings menu.)
•
In the ConnectLife app, go to the »Add devices« menu and select the appropriate device type.
Then scan the QR code (it can be found on the appliance's serial number plate; you can also
enter the AUID/SN number manually).
•
Open the dishwasher door and press
•
On the dishwasher's control panel: Press
•
On the dishwasher's control panel: Press and hold
Network symbol on the display
Flashing 0.5 sec on/off
Flashing 1.0 sec on/off
Glows
30
To download the ConnectLife app, scan the QR code or search for ConnectLife
in your favorite app store.
The dishwasher is ready to be connected to your wireless network or
paired with your smartphone/tablet.
The dishwasher is connected to your wireless network.
The dishwasher is connected to your wireless network and the cloud.
Display
.
to activate the WiFi module.
for 3 seconds to initiate Connection setup.
Start/Stop
Advertisement
Table of Contents
