Kickplate Installation - Viking FDSB5423 Installation Manual

Installation
Headline
15
Lift unit off rollers to desired height and level unit using a
5/16" head wrench. NOTE: DO NOT use an electric device.
Overtightening can cause damage.
17
Make sure evaporator pan is in correct location.

Kickplate Installation

18
Align holes on both ends of louvered panels
and insert screws.
16
Insert mounting screws into 2x4 attached to wall stud
19
Using a Phillips screwdriver, attach the
kickplate to the unit and adjust to desired height.
27 27
Screw
Wall
2 x 4
Refrigerator