Dw711; (Volt); Lwa; Db(A) - DeWalt DW711-QS Original Instructions Manual

E N G L I S H
TABLE TOP MITRE SAW DW711
Congratulations!
You have chosen a D WALT Power Tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional Power Tool users.
Table of contents
Technical data
EC-Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement (U.K. & Ireland only)
Using an extension cable
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Technical data
Voltage
(U.K. & Ireland only)
Power input
Power output
Blade diameter
Blade bore
Max. blade speed
Max. cross-cut capacity at 90°
Max. cross-cut capacity 45°
Max. depth of cut 90°
Max. depth of bevel cut 45°
Mitre (max. positions)
Bevel (max. positions)
Compound cuts
Max. depth of cut at 90° mitre, 45° bevel
Max. depth of cut at 90° mitre, 48° bevel
Max. depth of cut at 45° mitre, 45° bevel
Max. depth of cut at 45° mitre, 48° bevel
Max. depth of cut at 48° mitre, 45° bevel
Max. depth of cut at 48° mitre, 48° bevel
Max. ripping capacity left/right
Max. depth of cut bench saw
Automatic blade brake time
Weight
Fuses:
Europe
U.K. & Ireland
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
en - 1
WALT one of the most
E

DW711

V 230
V 230/115
W 1,300/1,100
W 900/800
mm 260
mm 30
-1
min 2,750/2,850
mm 140
mm 100
mm 96
mm 45
left 48°
right 48°
left 48°
mm 48
mm 45
mm 48
mm 45
mm 48
mm 45
mm 180/60
mm 0 - 50
s < 10.0
kg 24
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
EC-Declaration of conformity
DW711
D WALT declares that these Power Tools have been designed in compliance
E
with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029-1,
prEN 61029-2-11, EN 55014, EN 55014-2, EN 61000-3-2 & EN 61000-3-3.
en - 1
en - 1
For more information, please contact D
en - 2
en - 2 refer to the back of the manual.
en - 3
Level of sound pressure according to 86/188/EEC & 98/37/EEC,
en - 3
measured according to prEN 61029-2-11:
en - 3
en - 3
en - 3
L (sound pressure)
en - 5
pA
L (acoustic power)
en - 6
WA
en - 7 * at the operator's ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to
prEN 61029-2-11:
TÜV Rheinland

Product and Safety GmbH (TRPS)

Am Grauen Stein 1

D-51105 Köln
Germany
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
WALT at the address below or
E
DW711

dB(A)*

90.8
dB(A) 98.8
DW711
< 2.5 m/s 2
Cert. No.
BM 9910407
15