CABINET COVER
1 The plate assembly(Top) is disassembled.
2 Pull out the drawer and unscrew 2 screws.
3 Lift the side the Control Panel Assembly and
pull it out
1 Two screws are unscrewed.
2 Push out PANEL ASSEMB L Y , CONTROL after
Push the hook(
,
2
1
3 Unscrew the screws from the lower cover .
2 Disassembly cap cover and pump case.
3 Unscrew the screw from the CABINET COVER.
④
Remove gasket clamp and release gasket from
cabinet cover.
52
) below.