ERROR
8
MOTOR LOCKED
ERROR
9
POWER
FAILURE
10
NFC MODULE
ERROR
11
NFC VERSION
ERROR
SYMPTOM
•
The connector in the LEAD WIRE ASSEMBLY is
not connected to the connector of STATOR
ASSEMBLY.
Reconnect or repair the connector.
The washer experienced a power failure
•
Press the start/pause button
•
The connector in the DISPLAY PCB ASSEMBLY
is not connected to the connector of
NFC PCB ASSEMBLY.
Reconnect or repair the connector.
The NFC HARNESS between the NFC PCB
•
ASSEMBLY and DISPLAY PCB ASSEMBLY is cut
(open circuited).
Replace the DISPLAY PCB ASSEMBLY.
•
The NFC PCB ASSEMBLY is out of order/defective.
Replace the NFC PCB ASSEMBLY.
* nC is displayed only in the first screen of the Load
Test Mode.
•
NFC version is not matched.
Replace the NFC PCB ASSEMBLY.
* nU is displayed only in the first screen of the Load
Test Mode.
CAUSE
Page 36