Table of Contents
Advertisement
Troubleshooting
Symptom
Power doesn't turn on.
Leads and connectors are not properl
The unit doesn't
connected.
operate.
The fuse is blown.
Noise and other factors are causing the built-in
microprocessor to operate incorrectly.
Playback is not
The disc is dirty.
possible.
The loaded disc is of a type this unit cannot play.
No sound is heard.
Cables are not connected correctly.
The volume level will
not rise.
The volume level is low.
There's no sound.
This unit is not firmly secured.
There's audio skipping.
Cause
Confirm once more that all connections are correct.
Rectify the problem that caused the fuse to blow , and
then replace it. Be very sure to install the correct fuse
with the same rate.
Turn the unit off and then on.
Clean disc.
Check what type the disc is.
Connect the cables correctly.
Adjust the volume.
Secure this unit firmly.
15
Correction
Advertisement
Table of Contents
