Using Infrared; Using Bluetooth® Wireless Technology - Dell Axim X51 Owner's Manual

3
Tap Browse to navigate to a .pfx file you have stored on your device.
Select the file, and tap OK.
4
Type in the RSA-type private key password for this certificate under
Private key password. You can optionally click Unmask to make this
password visible while you type it.
5
Tap Install Certificate when you are done.

Using Infrared

Infrared is used to send and receive information remotely, such as contacts
and appointments, between two devices.
To send information:
1
Switch to the program where you created the item you want to send
and locate the item in the list.
2
Align the infrared sensors so that they are unobstructed and within
close range.
3
Tap and hold the item, and tap Beam
xxxx is the item you want to beam.
You can also send items (excluding folders) from File Explorer. Tap and hold
the item you want to send, and tap Beam File on the pop-up menu.
®
Using Bluetooth
Bluetooth is a wireless technology aimed at simplifying communications
between devices and the Internet. It is an open specification for short-range
communication of data and voice. For example, it can synchronize data
between hand-held devices and other computers.
To configure a device with Bluetooth wireless technology in a
Pocket PC environment:
1
Ensure that the two devices are turned on, discoverable, and within
close range.
Tap Start →Settings →Connections tab.
2
Tap Bluetooth →Devices tab →New Partnership. Your device
3
searches for other Bluetooth devices and displays them in the list.
98
Getting Connected
on the pop-up menu, where
Wireless Technology