Creating An Ethernet Connection - Dell Axim X51 Owner's Manual

7
Enter the phone number just the way you would dial it. If you need an
area code, be sure to include it. Tap Next.
8
Enter your user name, password, and, if applicable, your domain.
This information is provided by your ISP or network administrator.
NOTE:
You should not need to change any settings in Advanced. Most ISPs
now use a dynamically assigned address.
9
If the ISP you are connecting to does not use a dynamically assigned
address, tap Advanced, tap the TCP/IP tab, and then enter the address.
10
Tap OK.
11
Select other required options and tap Finish.
When you open Messaging, Internet Explorer Mobile, or MSN Messenger,
your device automatically connects. Once you are connected, you can:
• Send and receive e-mail messages using Messaging. Before you can use
Messaging, you need to provide the information that Messaging needs
to communicate with the e-mail server. See "Connecting Directly to an
E-Mail Server" on page 102 for more information.
• See Web and WAP pages using Internet Explorer Mobile. For more
information, see "Using Internet Explorer Mobile" on page 116.
• Send and receive instant messages with MSN Messenger. For more
information, see "MSN Messenger" on page 114.

Creating an Ethernet Connection

The term Ethernet refers to the family of LAN products covered by the
IEEE 802.3 standard. It defines what is commonly known as the
CSMA/CD protocol.
To create an ethernet connection:
1
Contact your network administrator to obtain a user name, password,
and domain name.
2
Install the network card driver, if required. For more information,
see the documentation that came with your network card.
100
Getting Connected