Before First Use; The Autodose Technology (Autodosing) - AEG LR8606AD6 User Manual

Table of Contents

Advertisement

22
www.aeg.com

9. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

10. THE AUTODOSE TECHNOLOGY (AUTODOSING)

Read this chapter carefully.
10.1 Introduction
Right detergent and fabric softener
dosage takes better care of the laundry
and ensuring good wash performances.
Too much detergent damages your
clothes and too little doesn't ensure good
wash performances.
This appliance is equipped with an auto
dosing system able to automatically
provide the right detergent and fabric
softener dosage to preserve the fabric
integrity and colour brightness.
AutoDose liquid detergent tank.
AutoDose fabric softener tank.
3. Make sure to fill the AutoDose tanks
with liquid detergent
softener
. Refer to "AutoDose
basic setting " paragraph in "The
AutoDose technology" chapter.
4. Pour 2 litres of water inside the drum.
This action activates the drain system.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
The appliance is pre-set by the factory
to suit most users habits.
Once started the programme, the
appliance will automatically release the
right amount of detergent and softener
according to the real fabric load, if
AutoDose is activated and the indicators
and/or
are visible on the display.
In some programmes,
AutoDose is deactivated (the
indicators
not displayed and the
display shows OFF)
because there are garments
requiring special detergents
or treatments. If this is the
case, pour the detergent and
other treatments in the
proper manual filling
compartment.
Please refer to "AutoDose
and options compatibility
with programmes" in
"Programmes" chapter.
Further explanations on
AutoDose and activation of
advanced settings are
available downloading the
APP.
and fabric
and/or
are

Advertisement

Table of Contents
loading

Table of Contents