3-2.L32K3 - Haier L26K3 Service Manual

Service Manual
Model No.:
3-2. L32K3
3-2-3. Remove the power supply
3-2-1. Remove the Stand
1. Lay down the unit so that back cover faces
4 Screws(M3*8)
upward
4 Screws(M4*12)
Bottom
2. Remove the six screws indicated with
the blue lines in the picture above.
3-2-4. Remove the mainboard and
3. Remove the stand
bracket of Side AV
3-2-2. Remove the Back Cover
1. Remove the fifteen screws indicated
4 Screws(M3*8)
3-2-5. Remove the metal slice of
the mainborad and power supply
12 screws (ST4*12)
7 Screws(M4X8)
2. Then remove the cables of DSMB indicated
with the blue lines in the picture below.
19