Table of Contents
Advertisement
EN 12
4.
TPM16.1HE LA
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3
Assembly/Panel Removal
Instructions below apply to the 43HFL5011T/12, but will be
similar for other 43"/49"/55"HFL5011T series models.
2
2
2
2
Figure 4-5 Rear cover removal[2]
2016-May-13
Mechanical Instructions
2
2
2
2
1
2
1
Figure 4-4 Rear cover removal[1]
5
20120_104.eps
4.3.1
Rear Cover
Refer to
Figure 4-4
Warning: Disconnect the mains power cord before removing
the rear cover.
1. Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set.
2. Remove the fixation screws [2], [3] and [4] that secure the
rear cover. Refer to
3. Unplug the connector [5] from SSB. Refer to
details.
4. Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
2
2
4
4
3
1
2
1
back to
div.table
and
Figure 4-5
for details.
Figure 4-4
for details.
Figure 4-5
2
2
M4 × 6
1
3
M3× 6
2
2
M3 × 6
3
Q3 × 8
4
2
20120_103.eps
for
Advertisement
Table of Contents
