Lenovo 21C3S0RL00 User Manual page 57

Removal procedure
Notes:
• A mylar film might cover the M.2 solid-state drive bracket. To access the M.2 solid-state drive, peel off the
mylar film first. Do not damage the mylar film and attach it in place after installation.
• There might be thermal pads on the top and under the bottom of the M.2 solid-state drive. When replacing
the M.2 solid-state drive, peel off the thermal pad on the M.2 solid-state drive and attach it in place after
installing the new M.2 solid-state drive. Ensure that the thermal pad under the M.2 solid-state drive stays
in its place and is not removed.
Type 1
Type 2
.
Chapter 6 CRU replacement
51