Philips AVENT SCD882 User Manual page 14

Video
17:00 Video
17:00 Video
Audio
Video mode
Press the mode button on the side of the parent unit to select the Video
mode�
When the Video mode is activated, the screen is always on, so you can see
your baby� All sounds are directly transmitted to the parent unit�
Note: Set the sensitivity level to 'very high' to have continuous
sound on the parent unit� Please see section 'Sensitivity' for more
information�
Audio mode
1 Press the mode button on the side of the parent unit to switch to
Audio mode�
When the Audio mode is activated, the display of the parent unit
switches off. After 3 seconds the display will completely turn off and
the status bar will disappear�
Note: The status bar is not visible when the display is off.
- 14 -