Basic Operation; Auto Searching - Craig CLC503 Owner's Manual

BASIC OPERATION

top of TV or remote control
TV (Green LED indicator will light). Press again to power OFF
(Standby) the TV (Red LED indicator
CHANNEL SETTING
CH + or CH -
control, a few seconds later, the selected channel will apper
on screen.
VOL + or VOL -
1. Press the SOURCE button on the remote control. The list of sources
will appear on the screen.
2. Press the Navigator or button to select the desired input source
then press the (enter) button to confirm the selection.
3. Or, press the SOURCE button on the top of TV repeatedly to select
the desire input source.
will light).
BASIC OPERATION

AUTO SEARCHING

The method to search and automatically store the available TV (including the
traditional Analog NTSC and Digital ATSC TV stations) stations located in your area:
Press the SOURCE button on the top of TV
repeatedly to set the input source to TV. (Or,
press the SOURCE button on the remote
control, the Source menu will appear on the
screen. Press the Navigator or button to
select and highlight TV then press (enter)
button to enter to TV mode.).
Press the MENU button on the TV or remote
control. The MAIN MENU will appear on the
screen.
Press the Navigator or button to select
and highlight CHANNEL then press the
(enter) button to enter. The CHANNEL
menu will appear on the screen.
Press the Navigator or button to select
and highlight the Signal Type then press the
Navigator or button to set the input signal
type to Air or Cable as the RF connection of
the TV.
Notes:
1. Set to Air if you are connecting the TV to the
antenna to receive the TV broadcasting over
the air.
2. Set to Cable if you are connecting the TV to
a Cable TV Converter.
Press the Navigator or button to select
and highlight Auto Channel Search then press
and hold the (enter) button for about 1
second, the TV will start searching all the
available Analogue and Digital TV stations and
store them in the Channel List.
When finished searching, press the MENU
button to exit. Press the CH + or - button to
select the stored TV program as desire.
FAQs:
How many channels will l actually receive?
The actual number of channels that can be received depends on how many channels
your cable or satellite company, or local area have provided.
Contact your company to determine the number of channels in your area.
21