Product Features Treadmill Overview - True M50 Owner's Manual

PRODUCT FEATURES
TREADMILL OVERVIEW
adjustment
bolts
Console Assembly—The console allows the user to set
up a workout program and control the treadmill during a
workout.
Contact Heart Rate Grips—Allows the user to check
their heart rate without wearing a wireless chest strap.
NOTE: For increased safety and accuracy, this feature
should only be used when the belt speed is below 4 mph.
Safety Key—A tethered safety device designed to attach
to both the user and the treadmill console. Removal of the
key from the console will stop belt motion to prevent injury
in an emergency.
NOTE: The safety key must be in place on the treadmill,
and should be attached to the user's clothing. The
treadmill will not operate if the safety key is not attached
to the treadmill.
Running Belt—The moving surface of the treadmill on
which the user walks or runs.
contact heart
rate grips
straddle
running
covers
belt
leveling
feet
console
assembly
Straddle Covers—Stationary covers on either side of
the belt, which allows the user to safely straddle the belt
during startup or in the event of an emergency.
Belt Adjustment Bolts—An adjustment system that
allows the users to adjust the belt tracking and tension as
needed.
ON/OFF Switch—Allows users to turn power on or off to
the treadmill.
Circuit Breaker—A safety device designed to protect the
treadmill from excessive electrical current.
Power Cord Inlet—Where the power cord plugs in to the
treadmill to receive power from the wall outlet.
Leveling Feet—An adjustable system used to level the
treadmill.
magnetic
safety key
on/off circuit
power cord
switch breaker
and inlet
21