Features & Controls - Echo BEAR CAT CH5653 Owner's Manual

3 FEATURES & CONTROLS
Section
Understanding how your machine works will help you achieve the best results when using your chipper. The following
descriptions define the features and controls of your machine.
REFER TO ENGINE OWNER'S MANUAL FOR FURTHER ENGINE OPERATING INSTRUCTIONS.
1. TRAILER HITCH
Always use 2 inch (50mm) ball and safety
chains.
2. JACK STAND
Always have in UP position and clear from
ground when moving. When in use, place
in DOWN position on a level surface.
3. BELT GUARD
Never remove guards when in use.
4. DISCHARGE TUBE
Chipped materials exit through the
rotatable discharge chute.
5. CHIPPER CHUTE
Feed materials to be chipped through the
chipper chute.
6. BELT ENGAGEMENT LEVER
When the pedal is depressed, the drive
belt is disengaged. When the pedal
is released, the drive belt is engaged.
Depress pedal to start engine.
1. ENGINE THROTTLE
Changes engine speed. Refer to
engine manual for further engine
operating instructions.
2. ENGINE CHOKE
Use when starting a cold engine. Pull
to ON position when starting. Push
lever to OFF position when engine is
running.
3. KEY SWITCH
Turn to start engine. Do not crank
starter for more than ten seconds or
damage could result.
3
1
2
6
5 INCH CHIPPER
5
4
9