Something Not Working - Electrolux Zanussi ZDE 36150W Instruction Booklet

Something not working?

If a problem occurs, you can try to solve it yourself following the instructions below. If you call out an
engineer when one of the following problems occurs, or to repair a fault due to incorrect use, the
callout will be charged even if requested within the guarantee period.
Problem
The drier is not working
properly
The drying results are not
satisfactory
The drying cycle
exceptionally takes a long
time
The loading door
cannot be closed
All manuals and user guides at all-guides.com
Possible cause
• Mains plug disconnected
• The START button has not
been depressed.
• No time programme selected
• Loading door open
• Fuse or residual current circuit
breaker in fuse box (domestic
installation) faulty
• Wrong programme selected
• Lint filter blocked
• Wrong filling quantity
• Laundry not sufficiently dried
• Deposit on the drum inner sur-
faceor on the drum ribs
• Vented air transport disrupted
• Lint filter blocked
• Lint filter not installed and/or
filter lid not locked in position
Solution
• Plug in mains plug
• Press START button
• Select time programme
• Close loading door
• Check fuse or residual current
circuit breaker. Faults can be
eliminated by an electrical
engineer
• Select another (time) pro-
gramme for the next drying
cycle
• Clean lint filter
• Observe recommended filling
quantity
• Pre-dry laundry sufficiently
• Clean drum inner surface and
drum ribs
• Straighten - air venting hose
and/or clean air venting ducts
• Clean lint filter
• Install lint filter and/or lock fil-
ter lid in position
13