Table of Contents
Advertisement
DRAFT
3 Plug the other end of the power cable
into a compatible AC power adapter.
4 Plug the AC power adapter into a
standard wall outlet.
The device displays the current
battery charge level.
Turning On the Device
Press and hold
.
Adjusting the Backlight
1 Select
to open the status page.
2 Use
and
to adjust the
brightness.
Activating the Device
WARNING
Before you can use the inReach
of your GPSMAP 67i device, including
messaging, SOS, tracking, and inReach
Weather, you must activate it.
1 From your computer or smartphone,
go to explore.garmin.com to create
an account and activate a service
plan.
2 Turn on the device.
3 Select Activate.
4 Follow the on-screen instructions.
4
NOTE: You must enter the device
IMEI number and authorization code
to complete the online portion of
activation before you go outdoors.
5 Go outdoors to an open area with a
clear view of the sky, and point the
antenna on the device toward the sky
for optimal performance.
6 Wait while the device communicates
with the Iridium satellite network.
NOTE: It may take up to 20 minutes to
activate your device. The device must
send and receive several messages,
which takes longer than sending a
single message during regular use.
Your device should remain outdoors
until activation completes.
features
®
Iridium Satellite Network
Your device requires a clear view of
the sky to transmit messages and track
points over the Iridium satellite network.
Without a clear view of the sky, your
device attempts to send the information
until it acquires satellite signals.
TIP: For the best connection with
satellites, place the device with the
antenna pointed toward the sky.
Quick Start Manual
Advertisement
Table of Contents
