Panel Facilities - Pioneer SX-2900 Service Manual

8. PANEL FACILITIES
® |llustration shows multi-voltage model.
@ @®@ @ ©
@) CHANNEL STEP switch
@FM/AM ANTENNA terminals
Use these antenna terminals for receiving FM and AM broadcasts.
@ INPUT jacks
PHONO .........0c0000e Connect to the output cables from a turntable.
CD... eesesseee Connect to the output jacks of a compact disc player.
VCRILINE..Connect to the output jacks of a video cassette recorder, etc.
@TAPE 1/DAT jacks
Connect these jacks to the cassette deck or digital audio tape deck.
©) TAPE2 jacks
Connect these jacks to the cassette deck.
© CONTROL IN/OUT jacks
IN: — Connect this jack to other Pioneer components when using those
components to control this unit.
OUT: Connect this jack to other Pioneer components when using the
remote contro! of this unit to control the other components.
NOTE:
The receiver's remote sensor does not function when a plug is inserted
in the IN jack. To operate, point the remote control unit at the remote
Sensor on the component to which the receiver's IN jack is connected.
To the CONTROL
—o>-—1>— IN jack of other
component.
Receiver
Pioneer component
bearing the mark.
Remote control
unit
CONTROL
io
"@
© Q® ®@ @)
@ SPEAKERS terminals
A: Connect to a first set of speakers.
B: Connect to a second set of speakers.
NOTE: '
No sound will be heard through the speakers when both A and B
switches are depressed if only one set of speakers has been
connected to either A or B SPEAKERS terminals.
Power cord
@) AC OUTLETS
VOLTAGE SELECTORS
@) GND terminal
Connect to the ground lead of a turntable.
35