Dell X95FF Installation And Service Manual page 49

Figure 40. Cable routing - 4 x 3.5-inch drive SAS or SATA backplane with ODD, Butterfly riser, BOSS and SNAPI
riser
Table 13. Connector descriptions for 4 x 3.5-inch drive SAS or SATA backplane with ODD, Butterfly riser,
BOSS and SNAPI riser
From
BP_PWR_1 (backplane power connector)
CTRL_DST_PA1 (fPERC connector on the backplane)
Figure 41. Cable routing - 4 x 3.5-inch drive SATA backplane with ODD, Butterfly riser, BOSS and SNAPI riser
To
SIG_PWR_1 (system board power connector)
SL3_CPU1_PB2 (signal connector on the system board, cable
marking MB SL3)
Installing and removing system components 49