Settings - Cambridge Audio 110094K Manual

22

Settings

Last updated: July 27, 2023 10:09. Revision #10132
Device Name
This is how your player will appear in your StreamMagic app and on your home network when using services like Spotify, Chromecast built-in and
TIDAL Connect.
Giving your player a unique name makes it easier to distinguish when using streaming and smart home services.
AirPlay Name
This is how your player will appear when using AirPlay or the Apple Home app.
Standby Mode
This selects what type of standby mode your player will use.
Network Standby means your player will still be controllable by the StreamMagic app and other network services.
If Eco mode is chosen your player will use even less power in standby but will need to be switched on either by the front panel or the remote
control.
Automatic Power Down
This sets how long your player will wait while inactive before switching in to standby.
Roon Ready DSD
This will allow you to choose how Roon provides DSD content.
Use DoP for digital output – If your device does support native DSD in DoP format.
Use PCM for digital output – If your device doesn't support native DSD.
Pre-Amp
With Pre-Amp mode enabled the volume of the device's line output can be controlled using the app.
Note: Pre-amp mode and volume control is only available with firmware version 132-b-007 or later.
Volume Limit
This sets the maximum volume that other streaming services like AirPlay 2, Spotify, TIDAL Connect and Chromecast built-in can set. The
StreamMagic app volume controls can override this setting.
Early Update
Setting this to 'On' will let you try out the latest firmware ahead of general release.
For more information and to find out what's new visit our FAQ.
Firmware
This will check for and apply any new firmware available for your player.
When left in network standby overnight your player will check and apply any new updates.
Factory Reset
This will return your player to its factory settings.