Download Print this page

Philips GC6740 Series Instructions

Hide thumbs Also See for GC6740 Series:

Advertisement

Quick Links

English
6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips
offers, register your product at www.philips.com/welcome.
Read this user manual, the important information leaflet, and the quick start guide carefully before you use
the appliance. Save them for future reference.
Product overview (Fig. 1)
1 Soleplate
2 'Iron ready' light
3 CALC-CLEAN button with light
4 Steam trigger/Steam boost
5 Temperature dial
6 Water supply hose
7 Heel
8 Water tank filling door
9 Carry lock release button (GC6730, GC6740 series only)
10 Iron platform
11 On/off switch
12 Mains cord with plug
13 Water supply hose and mains cord storage compartment
14 Smart Calc-Clean container
Exclusive technology from Philips
Compact ProVelocity technology
This technology delivers continuous steam that penetrates deeply to remove creases easily. At the same
time, it keeps the appliance more compact and lighter than traditional steam generators, for easier storage.
Preparing for use
Type of water to use
This appliance has been designed to be used with tap water. However, if you live in an area with hard
water, fast scale build-up may occur. Therefore, it is recommended to use distilled or demineralized water to
prolong the lifetime of the appliance.
Warning: Do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling
agents, ironing aids, chemically descaled water or other chemicals, as they may cause water spitting,
brown staining or damage to your appliance.
Filling the water tank
Fill the water tank before every use or when the water level in the water tank drops below the minimum
level. You can refill the water tank at any time during use.
1 Open the water tank filling door (Fig. 2).
2 Fill the water tank up to the MAX indication (Fig. 3).
3 Close the water tank filling door ('click').

Advertisement

loading

Summary of Contents for Philips GC6740 Series

  • Page 1 English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Read this user manual, the important information leaflet, and the quick start guide carefully before you use the appliance.
  • Page 2: Steam Boost Function

    Note: refer to the garment label for recommended temperature setting. Do not iron non-ironable fabrics. 6 Wait until the ‘iron ready’ light lights up continuously (Fig. 4). This takes about 2 minutes. 7 For GC6730, GC6740 series only: press the carry lock release button to unlock the iron from the iron platform (Fig. 5).
  • Page 3: Cleaning And Maintenance

    Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has accumulated inside the iron. This is normal. For more information on how to carry out the Calc-Clean process, refer to the videos in this link: http://www.philips.com/descaling-iron.
  • Page 4: Cleaning The Soleplate

    3 Fold the mains cord and water supply hose together. Push them into the storage compartment (Fig. 22). 4 For GC6730, GC6740 series only: push the carry lock release button to lock the iron onto the iron platform (Fig. 23). You can carry the appliance by the handle of the iron when it is locked onto the iron platform (Fig.
  • Page 5 English Problem Possible cause Solution The appliance has The auto shut-off function is To swith on the appliance again, set the switched off. activated automatically. The on/off switch to “off” position and then to appliance enters the standy “on” position. mode if it has not been used for 15 minutes and switches off if it has not been used for another...

This manual is also suitable for:

Gc6730