Advertisement
Ref. No.
3
Procedure
Removal of the front panel ass'y
2. Remove the 2 connectors (CP1, CP2).
3. Remove the 1 flat cable (CN60).
Front panel assy
4. Remove
the front panel
ass'y in the direction
of
arrow.
Procedure
-1-3--4
¢ Pull out the flat cable while
pressing the connector.
Connector
FL drive PC.B.
Rec level knob
3. Remove the 2 flat cables (CN40, J971).
4. Remove the 1 screw (@).
1. Pull out the rec level knob.
5. Release the 2 claws.
2. Remove the nut.
6. Remove
the
FL
drive
P.C.B.
in the
direction
of
arrow.
Removal of the operation P.C.B.
FL
drive
PCB.
1. Pull out the 2 knobs.
2. Remove the 7 screws (@~@).
3. Release the 9 claws.
* Remove
the
rec
level
P.C.B.
in the
direction
of
arrow.
Advertisement
