Advertisement
RS-BX606
Mi LOCATION OF CONTROLS
Control section
@
© ©©
©
Power switch (POWER)......For PP area
Press (M_..m) to switch the power on.
Press again (m_.M) to switch the power off.
Power "STANDBY (5/ON" switch...For others
(POWER # STANDBY
(') = ON)
This switch switches ON and OFF the secondary circuit power
only. The unit is in the "standby" condition when this switch is
set to the STANDBY ( position. Regardless of the switch
setting, the primary circuit is always "live" as long as the
power cord is connected to an electrical outlet.
Eject button (4 EJECT)
This button is used to open the cassette holder.
Cassette holder
Display section
(See "Display section" on page 6.)
Monitor switch (MONITOR)
© Recording-level control (REC LEVEL)
This control is used to regulate the recording level.
@) Recording-balance control (BALANCE)
This control is used to balance the left and right sound levels
during recording.
Headphones volume control (PHONES LEVEL)
@Q) Headphones jack (PHONES)
Operation section
(See "Operation section" on page 5.)
@) Bias-adjustment control (BIAS ADJUST)
The frequency response for each tape type can be equalized by
using this control.
The monitor switch is used to select the sound source just prior
to or just after recording.
"SOURCE?"
position:
Set to this position to monitor the sound
to be recorded.
"TAPE"
position:
Set to this position to monitor the sound
just recorded.
Advertisement
