Advertisement
60HHecti
toaWIIILAHa
co
guri
Hetwerksetti
s
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Connecting
to
@
WLAN
2
4
On the Home screen, scroll to <Wi-Fi>.
Select
, @,, @, or
Press [MENU], and then select Wi-Fi Setting.
• In some modes,follow the on-screen instructions until the Wi-FiSetting
screenappears.
The camera automatically searchesfor availableAP devices.
SeLectan AR
Wi-Fi Setting
_J]J_
Refresh
Samsung
2
_D))
"@"
Samsung
3
_
II_ _
Samsung
4
J]_]
I_ "_"
((D))
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [@] to open network setting options.
• When you select a secured AP, a pop-up window appears. Enter the required
passwords to connect to the WLAN. For information
about entering text, refer
to "Entering text". (p. 105)
• When a Iogin page appears, refer to "Using the Iogin browser". (p. 103)
• When you select an unsecured AP, the camera will connect to the WLAN.
• If you select a WPS profile supported
AP, select _ _ WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS profile
supported AP by selecting }
_ WPS button connection on the camera, and
then pushing the WP$ button on the AP device.
• Select Refresh to refresh connectable
APs.
• Select Add wireless network to add an AP manually. Your AP name must be
in English to add the AP manually.
Wireless network
(ST150F/ST151 F/ST152F only)
102
Advertisement
