Advertisement
Quick Links
LSCK
LINEAR SERIES COUNTER KIT ASSEMBLY
c
e
d
END PANEL WITH
c
END PANEL
VENT
OPTIONAL FIXED
FEET ( SEE PAGE 4)
Page 1
Date Modified: 07/08/23 Check website for latest version
b
b
d
f
a
e
FRONT PANEL
PARTS AND SHIPPING
PART
KEY
a
b
c
d
e
f
* base shelf pieces not available for RF units due to venting requirments
f
BASE SHELF
PIECE
b
TRAY RACE
PARTS
MODEL AND NUMBER OF PARTS AND CODE
LSCK3
LSCK4
CKFF3
CKFF4
1
1
FLAT PACK
FRAME
CKFF3
CKFF4
2
2
TRAYRACE
CKTR3
CKTR4
END PANEL
CKPN
END PANEL
CKEP
WITH VENT
4
4
FRONT
PANELS
CKFP3
CKFP4
2
3
BASE SHELF
PIECES *
CKBS3
CKBS4
a
FLAT PACK FRAME
Download C.A.D models or contact us on
LSCK5
LSCK6
CKFF5
CKFF6
1
1
CKFF5
CKFF6
2
2
CKTR5
CKTR6
6
6
CKFP5
CKFP6
4
5
CKBS5
CKBS6
COSSIGA.COM
Advertisement
Related Manuals for Cossiga LINEAR Series
Summary of Contents for Cossiga LINEAR Series
- Page 1 LSCK LINEAR SERIES COUNTER KIT ASSEMBLY PARTS AND SHIPPING PART PARTS MODEL AND NUMBER OF PARTS AND CODE LSCK3 LSCK4 LSCK5 LSCK6 CKFF3 CKFF4 CKFF5 CKFF6 FLAT PACK FRAME CKFF3 CKFF4 CKFF5 CKFF6 TRAYRACE CKTR3 CKTR4 CKTR5 CKTR6 END PANEL...
-
Page 2: Base Frame
LSCK LINEAR SERIES COUNTER KIT ASSEMBLY Label on top frame denotes position of post in the frame. ie. A1 top inside post to A1 on frame. Labels are on the INSIDE of posts Label on bottom frame denotes position of post in the frame. - Page 3 LSCK LINEAR SERIES COUNTER KIT ASSEMBLY TRAY RACE PANEL SCREWS Use the screws to attach tray race to posts. Locate the bag of panel screws. screw in half way so panels can slide in. ( may need adjusting ) Gap each end...
- Page 4 LSCK LINEAR SERIES COUNTER KIT ASSEMBLY EXTENDABLE FEET Extendable fixed feet replace castors. Before frame assembly, remove castors and replace with feet using bolts on the under side. ( to be fitted by others ) ORDERED SEPARATELY AS AN OPTION ( NOT AVAILABLE AUS /NZ ) Download C.A.D models or contact us on...
- Page 5 LSCK LINEAR SERIES COUNTER KIT ASSEMBLY PLACING LS UNITS IN COUNTER Bolts retained for fixing gantry post. Lifting brackets are fitted to assist removing the Use four people lifting each corner. unit from the packaging and placing in cabinetry. Use a lift bar that can fit through the 35 x 35mm square hole.