Table of Contents
Advertisement
Switch the steam combination oven
on.
The main menu will appear.
Select the function you want.
The function will appear first, followed
by the recommended temperature.
Change the recommended
temperature and set the cooking
duration, if necessary.
Otherwise the recommended
temperature will be accepted within a
few seconds. You can change the
temperature later via the arrow
sensors.
Confirm with OK.
Select the required bursts of steam in
the
Moisture Plus
(see "Moisture Plus").
The prompt to prepare water for the
cooking process appears in the
cooking
and
Moisture Plus
operating modes.
Fill a suitable container with the
required amount of fresh tap water
and follow the instructions in the
display (see "Operating principles –
Drawing in water").
Place the food in the oven.
The current temperature will appear and
the heating-up phase will begin.
You will see the temperature rising in
the display. A buzzer will sound when
the selected temperature is reached for
the first time.
operating mode
Steam
After cooking, select the sensor for
the selected function to end the
cooking programme.
Risk of injury due to hot steam.
When using a cooking programme
involving steam, a lot of hot steam
can escape if the door is opened.
The steam can cause burns.
Step back and wait until the hot
steam has dissipated.
Take the food out of the oven.
Drying the oven compartment after a
steam cooking process
We recommend drying the oven
compartment with the
maintenance programme after a
cooking process has finished in the
Steam cooking
operating mode.
The
maintenance programme
Drying
consists of up to 3 phases: residual
water evaporation in the empty oven
compartment, drying by heating up
the oven compartment and rapid
cooling with the door slightly open.
You will need to carry out the
maintenance programme to protect
the oven compartment from
corrosion and to completely
evaporate any residual moisture.
Follow the instructions in the display.
Use a sponge or soft cloth to remove
any water and condensation in the
oven compartment and drip channel.
Close the door.
If the
maintenance programme
Drying
has finished, switch off the steam
combination oven.
Operation
Drying
Drying
53
Advertisement
Table of Contents
