Table of Contents
Advertisement
Replacing the Quick Clean Pod Cartridge
Frequency of use
Every day
A few times per week
Every week
Every month
Always shake excess water off the shaver before you
place it in the Quick Clean Pod.
1 Place the shaver upside down into the Quick Clean
Pod. The shaver automatically detects that it is in the
Quick Clean Pod.
2 Switch on the shaver to start the cleaning program.
Each cleaning program takes approximately one
minute. During the cleaning program the remaining
time is displayed as a countdown clock on the handle.
3 Let the shaver air-dry completely in the Quick Clean
Pod before storing it.
Replace the Quick Clean Pod Cartridge immediately
when the cartridge replacement icon on the Quick Clean
Pod becomes visible or follow the table below.
Cycles
About 30
About 20
About 13
About 3
1 Twist and remove the top of the Quick Clean Pod.
When to replace
the Quick Clean Pod
Cartridge
Every month
Every 2 months
Every 3 months
Every 3 months
40
40
English
Advertisement
Table of Contents
