Table of Contents
Advertisement
English
Using the Quick Clean Pod
3 Lift the tab on the seal and pull it by the corner to
remove the seal from the Quick Clean Pod Cartridge.
4 Press the small circular piece on the handle of the
Quick Clean Pod Cartridge to break the snap hook on
the handle.
5 Place the Quick Clean Pod Cartridge into the Quick
Clean Pod.
6 Put the top of the Quick Clean Pod back onto the
base and turn it clockwise until you hear a click.
Do not tilt the Quick Clean Pod to prevent leakage.
Note: If you use the shaver with shaving foam, shaving
gel or pre-shave products, thoroughly rinse the shaving
heads before you use the Quick Clean Pod.
39
39
Advertisement
Table of Contents
