Installation; Unpacking; Positioning; Assembly Upon A Stand Kit - Electrolux EWF 1499 Instruction Booklet

Table of Contents

Advertisement

Available languages

Available languages

Installation

Unpacking

All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.
1. Using a spanner, unscrew and remove the two
rear bottom screws. Slide out the two plastic pins.
Lay the machine on its back, taking care not to
squash the hoses. This can be avoided by
placing one of the corner packing pieces between
the machine and the floor.
P1129
2. Remove the polystyrene block from the bottom of
the machine and release the two plastic bags.
1
2
3
P1124
3. Very carefully slide out the left polythene bag,
removing it towards the right and then
downwards.
4. Very carefully slide out the right polythene bag,
removing it towards the left and then upwards.
5. Carry out the bottom cover placed into the drum
of your appliance, lay its hook as the arrow «A»
indicatesand push the top of the cover to seal it
closed.
4
3
P1204
P0001
A
P1205
Important!
You can find more detailed instructions regarding
the bottom cover assembling in its relative bag.
6. Set the machine upright and remove the
remaining rear screw. Slide out the relevant pin.
7. Plug all the holes with the plugs which you will
find in the envelope containing the instruction
booklet.
P1128

Positioning

Install the machine on a flat hard floor.
Make sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that the
machine does not touch the wall or other kitchen
units.
Carefully level by screwing the adjustable feet in or
out. Never place cardboard, wood or similar
materials under the machine to compensate for any
unevenness in the floor.
P1051

Assembly upon a stand kit

P1216
This appliance can be installed upon a steel Stand
with Drawer to make the loading and unloading of
your laundry easier.
Please ask authorized dealer the suitable stand kit.
34
P0002
Stand Dimension:
Height: 30 cm.
Width: 60 cm.
Depth: 60 cm.

Advertisement

Chapters

Table of Contents
loading

Table of Contents