BenQ RP6504 User Manual page 16

No. Name
LAN
12
VGA
13
PC AUDIO-IN
14
DP IN
15
PUBLIC 3.0*
16
TYPE-C*
17
OPS Slot
18
* With these smart ports, a laptop (connected to BenQ Board via USB Type-C or HDMI + Touch USB) can use
the USB devices, speakers, and external cameras from BenQ Board to enhance the conference experience.
Please note that the built-in array microphone can only be accessed by an OPS source.
• USB 2.0: 5V 500mA / USB3.0: 5V
• Rear Type-C (data transfer only): 5V
• Rear Type-C:
• 5V 3A=15W (with OPS)
• 15V 3A=45W (without OPS & turn on front 100W )
• 20V 3.25A=65W (without OPS & turn off front 100W)
• Front Type-C:
• 5V 3A=15W (without OPS)
• 15V 3A=45W (without OPS)
• 20V 3.25A=65W (with OPS; without OPS & turn off front 100W)
• 20V 5A=100W (without OPS & turn on front 100W )
• OPS= 18V 5A; 90W
• : Direct Current / DC
• : Alternating Current /AC
• Turn on/off Front USB-C 100W charging from Settings > Advanced.
• The maximum length for the cables to be used with the USB slots are 5m (USB 2.0) and 3m (USB 3.0).
• RP04 has a limit to the number of USB ports you can connect to. Do not connect a USB hub to the display
when all USB ports are occupied, as new devices may not be recognized by the system.
Supports LAN In & Out, 10/100/1000 Mbps for Android system
and OPS.
Receives video input from an external device (such as a computer).
Receives audio input from an external device.
Connects a video source to a display device.
Connects to USB devices such as web cameras or USB flash
drives.
For port 16 & 17, use only one port at a time.
Supports installation of an OPS (Open Pluggable Specification)
device.
900mA
0.9A
11
Description