Table of Contents
Advertisement
AXIS Q6052 PTZ Dome Network Camera
Setup
3. Create the zoomed-in preset position so that it covers the area in the image where you assume that the license plate
will appear.
Create a motion detection profile:
4. Go to Settings > Apps and open AXIS Video Motion Detection.
5. Create a profile that covers the entrance of the gate and then save the profile.
Create an action rule:
6. Go to Settings > System > Events and add an action rule.
7. Name the action rule Gatekeeper.
8. From the trigger list, select Applications and then select the previously created motion detection profile.
9. From the action list, select the previously created preset position.
10. Click OK.
How to record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibration or shock. Vibration caused by the environment or an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera during after hours and you would like to receive a video clip of the event.
1. Go to Settings > System > Detectors.
2. Enable shock detection and set shock sensitivity value.
3. Click Save.
Create an action rule:
4. Go to Settings > System > Events and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select Detectors and then select Shock detection.
7. From the list of schedules, select After Hours.
8. From the list of actions, select Send Video Clip.
9. Select an existing stream profile or create a new one.
10. Set the pre-trigger time to 5 seconds.
11. Set the post-trigger time to 60 seconds.
12. Select an existing recipient or create a new one.
13. Click Ok.
Applications
About applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications
To find the user manuals for Axis applications, go to axis.com
12
Advertisement
Table of Contents
