Samsung RT16A6195SR User Manual page 16

Installation
STEP 2 Flooring
STEP 3 Leveling the refrigerator
CAUTION
• In all cases including door reversal, to prevent the refrigerator from tipping, make sure
the leveling leg on the door is on the floor and fully supporting the weight of the door.
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear. Level the refrigerator
using the special screws (levelers) on the front legs. Use a flat-head screwdriver to turn
the levelers.
16 English
Untitled-2 16
• The surface you install the refrigerator
on must support a fully loaded
refrigerator. (Approximately 200 lb or
90 kg.)
• To protect the floor, put a large piece
of cardboard along the path to the
refrigerator's final installation location.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to move the refrigerator, place
thick paper or cloth such as old carpets
along the path of movement.
To level the refrigerator, use a flat-
head screwdriver to turn the leveling
leg clockwise or counterclockwise. Turn
the leveling leg clockwise to raise, and
counterclockwise to lower the height.
2021-07-13 6:31:44