Table of Contents
Advertisement
Before placing food in the fresh food or freezer compartments
Remove all internal packaging. Ensure that all transit clips are removed from the
z
refrigerator. These are small rubber stoppers located at the back of the shelves.
Clean the inside of the appliance with a mix of warm water and a small amount of liquid
z
detergent. Use a soft cloth to remove dust collected during manufacture and transport.
Allow the refrigerator and freezer to run empty for 2 – 3 hours to allow each
z
compartment to cool to the appropriate temperature.
The appliance may have an odour on its initial operation, this will go when the
z
refrigerator and freezer have cooled sufficiently.
COMPLETE INSTALLATION
27
Advertisement
Table of Contents
