Product Safety Warnings - PaloAlto Networks TECHDOCS ION 1000 Hardware Reference Manual

Before You Begin

Product Safety Warnings

To avoid personal injury or death for yourself and others and to avoid damage to your Palo Alto
Networks hardware, be sure you understand and prepare for the following warnings before you
install or service the hardware. You will also see warning messages throughout the hardware
reference where potential hazards exist.
All Palo Alto Networks products with laser-based optical interfaces comply with 21 CFR
1040.10 and 1040.11.
The following safety warnings apply to all Palo Alto Networks firewalls and appliances, unless a
specific hardware model is specified.
• When installing or servicing a Palo Alto Networks firewall or appliance hardware component
that has exposed circuits, ensure that you wear an electrostatic discharge (ESD) strap. Before
handling the component, make sure the metal contact on the wrist strap is touching your skin
and that the other end of the strap is connected to earth ground.
French Translation: Lorsque vous installez ou que vous intervenez sur un composant matériel
de pare-feu ou de dispositif Palo Alto Networks qui présente des circuits exposés, veillez
à porter un bracelet antistatique. Avant de manipuler le composant, vérifiez que le contact
métallique du bracelet antistatique est en contact avec votre peau et que l'autre extrémité du
bracelet est raccordée à la terre.
• Use grounded and shielded Ethernet cables (when applicable) to ensure agency compliance
with electromagnetic compliance (EMC) regulations.
French Translation: Des câbles Ethernet blindés reliés à la terre doivent être utilisés pour
garantir la conformité de l'organisme aux émissions électromagnétiques (CEM).
• (ION 7000 and ION 9000
and relocating the heavier firewalls.
• Do not connect a supply voltage that exceeds the input range of the firewall or appliance. For
details on the electrical range, refer to electrical specifications in the hardware reference for
your firewall or appliance.
French Translation: Veillez à ce que la tension d'alimentation ne dépasse pas la plage d'entrée
du pare-feu ou du dispositif. Pour plus d'informations sur la mesure électrique, consulter la
rubrique des caractéristiques électriques dans la documentation de votre matériel de pare-feu
ou votre dispositif.
• WAN and LAN ethernet ports are suitable for interconnection to other local device ethernet
ports. These ports are not designed for direct connection to Public Switched Telephone
Network (PSTN) ports or interfaces. In addition, copper-based WAN ports, LAN ports, and
copper-based modular transceivers are not rated to connect to Telecommunications Outside
Plant (OSP) cabling.
ION 1000 Hardware Reference
only) At least two people are recommended for unpacking, handling,
8
2023 Palo Alto Networks, Inc.
©