Table of Contents
Advertisement
Optional Devices
3. Turn the computer upside down and remove the battery pack (refer to
Replacing the battery pack
4. Loosen the screw securing the memory module cover in place - please
note that this screw is attached to the cover in order to prevent it from
being lost.
5. Slide your fingernail or a thin object under the cover and lift it off.
6. Push the latches away from the module in order to release it - a spring
will force one end of the module up at an angle.
7. Grasp the module by its edges and remove it from the computer.
■
If you use the computer for a long time, the memory modules and the
circuits located close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
8. Seat the memory module cover in place and secure it with one screw.
Take care to ensure that the memory module cover is firmly closed.
9. Install the battery pack - refer to
Chapter 6, Power, if required.
10. Turn your computer over.
9-16
section in Chapter 6, Power, if required).
Slot A
Removing the memory module
Replacing the battery pack
Latches
Slot B
section in
User's Manual
Advertisement
Table of Contents
