Toshiba Qosmio G30-150 User Manual page 144

HW Setup
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
Network Boot Protocol is not displayed for Gigabit Ethernet LAN.
Keyboard
Wake-up on Keyboard
When this feature is enabled, and the computer is in Standby Mode, you
can turn on the system by pressing any key. However, please be aware that
this option will only work with the internal keyboard and only when the
computer is in Standby Mode.
Enabled
Disabled
CPU
This function allows you to set the processor's operating mode.
Please note that this option is displayed only on models with an Intel
Core™ Duo processor and an Intel
Dynamic CPU Frequency Mode
This option allows you to configure the power saving modes associated
with the processor - the following settings are available:
Dynamically
Switchable
Always High
Always Low
7-6
[PXE] Sets PXE as the protocol (Default).
[RPL] Sets RPL as the protocol.
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function
(Default).
The processor's power consumption and
automatic clock speed switching functions are
enabled - in use the processor's operation is
automatically switched when necessary (default).
The processor's power consumption and
automatic clock speed switching functions are
disabled - in use the processor will always run at
its highest level of power consumption and its
highest speed.
The processor's power consumption and
automatic clock speed switching functions are
disabled - in use the processor will always run at
a lower level of power consumption and a low
speed.
®
Core™ 2 Duo processor.
®
User's Manual