Table of Contents
Advertisement
Standard DHCP Mode
This option registers a phone to the system using a dynamic IP address assigned by a server that uses a
DHCP standard protocol. You can use this feature if a separate DHCP server is used.
You can use this feature if a separate DHCP server is used or if you attempt to access FON AP.
When you move to another site (area shift), you can still use your phone without registering it again.
If you want to access FON AP, select [On]; if not, select [Off],
1
and then press [OK].
101
SMT-W5100 User Guide _
Advertisement
Table of Contents
Troubleshooting
