Advertisement
Available languages
Available languages
21"
(53.3 cm)
3-3/4"
(9.5 cm)
1-1/4"
(3.2 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Integral apron, heater, left drain
Integral apron, heater, right drain
Fixture*:
Bathing well:
Basin area, bottom
55" (139.7 cm) x 23-1/4" (59.1 cm)
Basin area, top
64" (162.6 cm) x 32" (81.3 cm)
Weight
149 lbs (68 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
78.5 gal (297 L)
* Approximate measurements for comparison only.
Pump: 1-speed
Heater: 1.5 kW
Minimum access panel
pump/control (required):
1047192-1-C
11-1/16" (28.1 cm)
72" (182.9 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1114-HL
K-1114-HR
V
Hz
120
60
120
60
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
1-1/4" (3.2 cm)
21" (53.3 cm)
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
41 lbs/square foot (199.6 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
A
are nominal.
7.5
12.5
2
Recommended faucet area
1-1/4"
(3.2 cm)
Tile Flange
Detail
42" (106.7 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.
Advertisement
