Table of Contents
Advertisement
Chapter 3
3 1
Install Wi-Fi & Bluetooth Drivers
Before You Start:
If you plan on using Bluetooth and already have connected Bluetooth devices,
proceed with step 1. Otherwise, skip to step 2.
1
Disable Bluetooth. Right-click
Manager. Expand the Bluetooth node to find your existing Bluetooth device.
Right-click the existing Bluetooth device and select Disable.
Note: Make sure you have disabled all existing Bluetooth devices (both built-in and third party).
2
Insert the resource CD into your CD drive and run the
pop-up Autoplay window.
Note:
1. You can also download the driver or check the new release at
https://www tp-link
2. In some operating systems, the CD screen will pop up automatically. Otherwise, run the CD manually.
3
Click the Wi-Fi icon or the Bluetooth icon and follow the instructions to
complete the installation.
Note:
• If an unknown publisher message pops up, select Yes to continue.
• If Windows User Account Control requires admin credentials, type user name and password of your
Windows administrator account.
4
Once finished, restart your computer.
Note:
• Your Wi-Fi Bluetooth USB adapter will be listed in the Device Manager when the driver is installed
correctly.
• If the driver installation fails, disable the antivirus software and firewall, then try again.
My
Computer, select Manage, go to
com/download-center.
Use the Adapter
Device
Autorun.exe
from the
9
Advertisement
Table of Contents
