Pioneer PD-Z970M Operating Instructions Manual page 2

Multi-play compact disc player
Hide thumbs Also See for PD-Z970M:
Table of Contents

Advertisement

IMPORTANT
1
The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the User to the presence of
uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO: NOT OPEN:
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK,
DO
NOT
REMOVE
COVER
{OR
BACK}.
NO
USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
IMPORTANT
2
if the apparatus is fitted with AC mains power outlet{s},
see REAR PANEL FACILITIES for convenient
connection of additional Hi-Fi componentis). Make all
connections to the AC outlet{s) and the signai terminals
first. Connect the plug to the wall socket last, make
sure that the power switch is off.
FOR USE IN THE UNITED
KINGDOM
WARNING: This plug must only be connected to
electronic apparatus equipped with suitable sockets.
If not, cut off the plug and fit an appropriate type in
accordance with the instructions below.
'Tha cut-off plug must he disposed of as an electrical
shock hazard couid axist if connacted to a socket
outlet.
'The wires in this mains lead are coloured in accordance
with the following code:
Blue:
Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
marking identifying the terminals in your plug proceed
as follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured biack.
The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or
coloured red.
Do not connect aither wire to the earth terminal of a
three pin plug.
READ INSTRUCTIONS — All the safety and operating
instructions should be read before the appliance is.
operated.
RETAIN INSTRUCTIONS — The operating instructions
should be retained for future reference.
HEED WARNING ~ Ail warnings on the appliance andin
the operating instructions should be adhered to
FOLLOW INSTRUCTIONS — All operating and use in-
structions should be followed.
WATER AND MOISTURE ~ The appliance should not
be used near water ~ for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet base-
ment, of near a swimming poo, etc.
LOCATION ~ The appliance should be installed in-a
stable location.
WALL OR CEILING MOUNTING ~ The apptiance
should not be mounted ta @ wall or ceiling,
VENTILATION ~ The appliance should be situated so
thar its location or position does not interfere with
its proper ventilation. For example, the appliance
should nat be situated
ona bed, sofa, rug, or similar
surface that may block the ventilation openings; or,
placed in a built-in installation, such as a bookcase
or cabinet that may impede the flow of air through
the ventilation openings.
HEAT ~ The appliance should be situated away from
heat sources such as radiators, heat registers,
|
stoves, or ather appliances (including amptifiers)
that produce heat.
POWER SOURCES ~ The appliance should be con-
nected to a power supply only of the type de-
scribed in the operating instructions or as marked
on the appliance.
POWER-CORD PROTECTION — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particutar attention to cords at
plugs, convenience receptacles, and the point
where they exit from the appliance
POLARIZATION ~ {f your purchased product is pro-
vidad with a polarized power plug, please read the
following instructions.
This product is equipped
with a polarized alternating currentline plug (3 plug
having one blade wider than the other), This plug
i
will fit into the power autlet only one way. This is a
safety feature, ff you ara unable to insert the plug
fuily into the outlet, try reversing the plug, If the
fluy should stilt fail to fit, contact your electeician to
|
saplice yaur absolute outlet. Do not defeat the
salaty purpose of the polarized plug
CLEANING - The appliance should be cleaned only
with a polishing cloth or 4 soft dry cloth. Never
clean with furniture wax, benzine, insecticides ar
other volatity liquids since they may corrode the
cabinet,
POWER LINES — An outdoor antenna should be located
away from power lines,
NONUSE PERIODS ~ The power cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time.
OBJECT AND LIQUID ENTRY — Care shouid be taken
so that objects do not fall and liquids are not spilled
into the enclosure through openings
DAMAGE REQUIRING SERVICE — The appliance
should be serviced by a Pioneer authorized service
center or qualified service personnel when:
@
The power-supply cord or the plug has been dam-
aged
@
Objects have fallen, or liquid has been spilled into
the appliance.
The appliance has been exposed to rain.
@
The apptiance does not appear to operate normally
or exhibits a marked change in performance.
@
The appliance has been dropped or the enclosure
damaged.
SERVICING — The user shouid not attempt to service
the appliance beyond that described in the opera-
ting instructions. For all ctherservicing, contact the
nearest Pioneer authorized service center.
eae
|
|
3
|
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT -~
ANTENNA
LEAO IN
WIRE
ANTENNA,
OUTDOOR ANTENNA GROUNDING — If an outsiae an-
tennais connected
to the antenna terminal, be sure
the antenna system is grounded so as to provide
some protection against voitage surges and built
up static charges
In the U.S.A. section 810 of the National Electrical
Code, ANSI/NFPA No, 70-1984, provides intorma-
tion with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and require-
ments for the grounding electrode. See Fig. A
CART — An apptiance and cart combination should be
moved with care, Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination
to overturn
NEC — NATIONAL ELECTRIC CODE
DISCHARGE UNIT
{NEC SECTION 810 — 20)
GROUNDING CONOUCTORS
iNEC SECTION 810 — 21)
<<S—~ GROUND CLAMPS
ELECTRODE SYSTEM
FIG. A
~ POWER SERVICE GROUNDING
{NEC ART 250. PART H)
2
<PRB1144>
En

Advertisement

Table of Contents
loading

Table of Contents