Advertisement
5.
CLOCK
5-1. CURRENT TIME AND DATE
There is a Backup Switch to retain clock memory. If you
set the switch ON ,turning off the POWER switch,
disconnecting the power cable or an intermittent power
failure will not erase the clock memories.
5-1-1.
Back-up Switch
Before setting the clock Backup Switch must be ON.
See page 8
3-1-1.
Installing the Microphone and Setting the
clock back-up switch
BACKUP SWITCH
5-1-2.
Setting the Current Time and Date
1. Press and hold the F key and the TONE key, then
turn the Power switch ON to set the clock.
Initial setting is 00:00.00' 1.1.1991
Adj
aaa
if
3}
amt
2. Set the HOUR
Rotate the Tuning control (0~23) to set the HOUR,
then press the TONE key.
. Set the MINUTE
Rotate the Tuning control (0~59) to set the MINUTE,
then press the TONE key.
tei
Er a
Week
MTWTFSS
. Set the YEAR
Rotate the Tuning control (00~99) to set the YEAR,
then press the TONE key.
. Set the MONTH
Rotate the Tuning control (I~12) to set the MONTH,
then press the TONE key.
. Set the DAY
Rotate the Tuning control (lI~END) to set the DAY,
then press the TONE key.
. Set a day of the week (LEVEL METER, see
illustration above)
The segments of the level meter are used to indicate
the day of the week.
Rotate the Tuning control to set the day of the week (
See accompanying illustration), then press the TONE
key. The transceiver will return to previous mode.
55
Advertisement
