Advertisement
1.
BEFORE OPERATION
To prevent electric shock, fire and other
injury, please note the following:
Never remove the case unless instructed to do
in this Instruction Manual. If the internal
parts are touched accidentally, a serious
electric shock might occur.
Do not place this unit where it will be exposed
to direct sunlight or close to heating
appliances.
Do not place anything on top of the cabinet.
To ensure good ventilation, do not put
anything on top of the cabinet and allow at
least 15 cm (6 inches) of space behind the unit.
The power requirement is 13.8 VDC.
Never attempt connection to a 24 VDC source.
Do not place the unit in areas of excessive dust,
high humidity or on unstable surfaces.
Do not drop pieces of metal, needles, coins and
other electrically conductive materials into the
unit.
Do not touch the power plug, when your hands
are wet.
If an abnormal odor or smoke is detected,
immediately turn the power off. Contact the
KENWOOD
service station or your dealer.
Cleaning
1. Turn the power off before cleaning the unit.
2. Do not use any type of abrasive pad, thinner, benzine
or any substances which may damage the unit.
3. Wipe the front panel and other exterior surfaces of
the unit with a soft dry cloth or a soft cloth lightly
moistened with water.
Advertisement
