Advertisement
(CCD OUT)
Adjusting procedure
1. Connect the C489 lead wire and the C519 lead wire to
CH 1 and CH 2 of the oscilloscope respectively.
CH 1: Video signal before time axis error compensation.
CH 2: Video signal after time axis error compensation.
2. Search for frame #5100 on the test disc. Adjust VR481
so that the center of CH 1's video signal jitter is delayed
by 7lus (1 H + 7.5ys) with respect to the CH 2's video
signal.
Note:
Do not confuse CH 1 and CH 2.
Adjustment diagram
Oscilloscope range AC
CH1: 20mV/div 10S /div (trigger)
Oscilloscope
CH2: 20mV /div
Advertisement
