Timer Operation; Auto Swing; Sleep Mode - NewAir NAC12KWHD3 Owner's Manual

TIMER OPERATION

To set a timer for powering on:
• Press the TIMER button and select a desired time for the unit to power on by
using the time settings buttons. You can also select a desired temperature.
• "Preset ON Time" will be displayed on the operation panel.
• "ON Time" can be set for any time from 0-24 hours.
• Press the TIMER button again to confirm settings. Timer indicator light will
illuminate.
• To deactivate the timer function, press the TIMER button until the timer
indicator light turns off.
To set a timer for powering off:
• When the air conditioner is on, press the TIMER button and select a desired
OFF time by using the time settings buttons.
• "Preset OFF Time" will be displayed on the operation panel.
• "OFF time" can be set for any time from 0-24 hours.
• Press the TIMER button again to confirm settings. Timer indicator light will
illuminate.
• To deactivate the timer function, press the TIMER button until timer
indicator light turns off.

AUTO SWING

After the unit turns on, press the OSCILLATION button. The louver will then
swing continuously up and down. By pressing this button again, the movement
will stop, and the louver will remain in the stopped position.

SLEEP MODE

• While in cooling mode, press the SLEEP button on the remote to set the
desired starting temperature. The set temperature will increase by 2°F after
one hour and 4°F after 2 hours.
• While in heating mode, press the SLEEP button on the remote to set the
desired starting temperature. The set temperature will decrease by 2°F after
one hour and 4°F after 2 hours.
• Press the SLEEP button again to cancel these settings.
www.newair.com
EN
20