Panasonic Omnivision PV-M1349 Operating Instructions Manual page 12

Display SET PROGRAM.
Press PROG.
* Ifa pro mn is already in memory,
press ,and P to select an
unused aa number.
1) Press AV to
CATEGORY: N/A
"| OD
select.
ae — 2) Press ® or 4
SET
:» KEY
to set.
* 1~31 = One time
¢ DAILY = MON~FRI
e WEEKLY SUN~SAT
= Same time once a
END :PROG/ACTION KEY
week
Exam le 8=—93 paceuons 31— 1 sme Dennen §&
Today's — 7 SELECTA/¥ Selection Order OAILY
Date LL weexvy a _WEEKLY ___ WEEKLY
(SAT) (MON) (SUN}
Repeat step 2 to set:
¢ start time, stop time
¢ Channel (or LINE for outside source)
¢ Category [N/A (not applicable), SPORTS,
MOVIE, COMEDY, MUSIC, DRAMA]
* Speed (SP, LP, SLP)
DATE start_stop cH) Make the notes.
imi! 9:00P 12:00A Re * If not wanted, go to step 4.
CATEGORY : MOVIE 1) Press A to
WISH TO-MAKE NOTES: KEY peo
ISH TOM 'f
E 2) Press AY to
SET
select.
3) Press P or 4
to set.
4) Press PROG
(or ACTION} to
end.
i» KEY
END :PROG/ACTION KEY
* Characters will change in the following order.
A=—B = Css: Z— BLANK— — —&
Melani: prea 2=1=0-/+! vase
Continued on the next page.
¢ lf "PLEASE PREPARE FOR TIMER REC" appears and/or the
PROGRAM TIMER indicator flashes, check that a cassette with
record tab is loaded and the Combination VCR is in Stop mode.
* if the start times of two programs overlap, the lower numbered
program will have priority.
* If the start time for a Timer Recording comes up during a normal
recording or One Touch Recording (page 11), the Timer Recording
will not be performed.
* If there is a power interruption of more than one minute, the
recording may not be performed or continue.
* If "INCOMPLETE" appears after all items have been set, check all
entries and make necessary corrections.
A check list before you begin.
([] All connections are made {see page 5.)
[_] Your Combination VCR is plugged in.
(_] The clock is set to correct time.
[_] The tape is long enough.
{_] The record tab is in place.
SELECT/
= SET
A -:CH UP
¥ :CH DOWN
> :VOL UP
4-VOL DOWN
Timer Recording Using
Combination VCR Buttons
You can set the Timer Recording using
ACTION key on the Combination VCR.
(See page 7.)
STOP/EJECT REW =+
SO@O@ (J [+]
o— ACTION ~~
7 Press STOP/EJECT and REW
together without a tape to display
MAIN MENU.
2 Press AW <4P to select "VCR"
and STOP/EJECT and REW
together to display SET UP VCR
screen.
8 Press AV to select "TIMER
PROGRAM" and P to display the
TIMER PROGRAM screen.
4, Repeat steps 2~5.
1 2 For assistance, call 1-800-211-PANA(7262)