Install - AT&T TRIMLINE 213 User Manual

Install

Table/desk installation
This telephone includes a 7-foot line cord with a modular plug on each end. Use this
cord to connect the telephone to a modular wall jack.
1. Fill in directory card
Remove the directory card and write in
your own telephone number. Also write the
telephone numbers (or names) that you want
to store in each memory location (See Page
13). Reinstall the card and clear plastic
cover.
2. Connect handset to base
Plug one end of the coiled handset cord
into the handset, and the other end into
the base.
3. Connect line cord to telephone
Plug the long line cord into the jack on the
underside of the telephone base. Then, feed the
line cord through the channel provided so the
telephone sits flat on your table or desk during
use.
4. Connect line cord to wall jack
Plug free end of the line cord into a modular wall
jack. Make sure it snaps firmly into place.
4