Create A Network For Guests - TP-Link Archer AX73V User Manual

Chapter 8
8 1

Create a Network for Guests

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
the Guest Network
3. Create a guest network as needed.
1 ) Tick the Enable checkbox for the 2.4GHz or 5GHz wireless network.
2 ) Customize the SSID. Don't select
manually input the SSID for guest network access.
3 ) Enable Bandwidth Control
Then enter the limited bandwidth value.
4 ) Set the effective time to keep the guest network.
5 ) Select the Security
Personal, Portal) and customize your own password. If
no password is needed to access your guest network.
4. Click Save. Now your guests can access your guest network using the SSID and
password you set!
5. You can also click
Wireless > Guest Network
section.
if you want to limit the network speed of your guests.
type (No security, WPA/WPA2-Personal, WPA2/WPA3-
Share Network to share the SSID and password to your guests.
or click Wireless
Hide SSID unless you want your guests to
Guest Network
on the top page. Locate
No security is selected,
40