Rear Panel - Telefunken SR-211 Instruction Manual

REAR PANEL

AC230V
1
1.
MAINS CABLE INLET : Please ensure that the input cable strain relief
bush is intact and has not been damaged.
2.
WARNING ICONS: Please be aware that this unit contains high voltages,
and should not be opened, please refer to page 2 of this manual.
Fixing the antenna
The reception quality will be directly determined by the
strength of the input signal. Although the location of the
tuner in relation to the transmitter is a main factor, the
antenna and it's fixing also play an important role.
Below is the instruction of fixing the antenna.
L
R
Signal Output
2
3. ANALOGUE AUDIO OUTPUTS. For connection to line input
4. 50 ohm antenna socket.
Pigtail antenna provided
for Band-III.
P-19
Model: SR-211
DAB+/FM RDS Tuner
Power Rating: 230V AC 50Hz
Max Power Consumption: 12W
Intron Electronic GmbH
Gewerbepark / In der Allwies
66620 Nonnweiler, Germany
TELEFUNKEN® licensed by
Telefunken Licenses GmbH
3
sockets on amplifiers.
Adhesive
tape
Antenna
50 Ohm
4
1.Press 'info' button on remote till
antenna icon appear on display.
UFO
Antenna signal strength icon
2.Move the antenna until you get
the strongest possible signal.