Front Panel Controls - Telefunken SR-211 Instruction Manual

FRONT PANEL
SR-211
DAB+/FM RDS Tuner
1
1. DISPLAY. Indicates the station on line 1 and displays dynamic text below
on line 2, which also displays other menu features.
2-5. Preset channel number 1/2/3/4
Press once to select preset station from 1 to 4
Press and hold the numeric button to save the station to preset number.
6. AUTO button.
In DAB mode: Press once for quick scan mode.
scans the DAB frequencies and takes approximately 23 seconds.
Press and hold for longer than 2 seconds for full scan mode.
does a full scan of all DAB/DAB+ frequencies and takes approximately 1
minute.
In FM mode: Press once to activate a 'seek' up through FM frequencies to
find the next available station.
Press and hold for longer than 2 seconds to activate a 'seek' up through
FM frequencies to find the previous available station.
7. INFO button:
This changes what information is displayed on line 2 of the LCD display.
8. DAB/FM SELECTOR button.
Press this to switch between DAB radio and FM radio.
P1 P2 P3 P4 AUTO INFO
2 3 4 5 6 7
A quick scan only
This
DAB/FM
8
9. ROTARY CONTROL KNOB.
In DAB mode: Turn clock wise to scroll up through station list. Turn
anticlockwise to scroll down through station list. Press once to select a
station required.
Press and hold for 2 seconds to switch 'AUTO ENTER' on/off.
AUTO ENTER on: no need to press ENTER button or ROTARY CONTROL
knob on front panel to confirm the station selected after scrolling.
AUTO ENTER off: must press ENTER button or ROTARY CONTROL knob
on front panel to confirm the station selected after scrolling.
in FM mode: Turn clock wise to scroll up through frequencies, turn
anticlockwise to scroll down through frequencies. Press once to change
audio mode: Auto, this will automatically detect between stereo and mono
broadcasts, press again to activate mono mode, this will play all
broadcasts in mono only.
10. POWER BUTTON. Switches mains power on/off to internal components.
11. LED indicator: it will be turned on in blue color when the unit is switch
on, it will be turned on in red color when the unit is in standby.
P-18
CONTROL
Press to select
9 10 11